|
|
|
|
Welcome to the new Sounds And Visions E.C. website, a one stop source for buying and selling your equipment. |
|
|
|
|
|
|
|
|
Would you like to be informed when new equipment comes in?
Submit your email address below! |
|
|
|
|
|
|
|
All Categories --> Pro Audio --> Synchronization and Clocks -->
Timeline Micro Lynx Synchronizer & Remote Tape Machine
Mint condition in and out. Included is the synchronizer box, remote and cable, & power supply. There's not much else to say about this unit. Everyone looking should know what it does. 100-250v serial # 1340. Also includes two transport sync cables, you can use these to build cables for your specific machine if you dont intend to use them with these specific machines. The cables included are for : (1) Ampex MM-1200 & (1) Sony VO-5850.
The TimeLine Micro Lynx provides an interface for SMPTE and MIDI time code generation, transport synchronizer operations, track enable, automated edit, and events control. The Micro Lynx system features wideband, high speed, 1/10 to 60x play speed, bi-directional time code readers and a multi-standard time code generator. There are two machine controller/synchronizers with software parameter selection for over 120 ports, MIDI ports, GPI and mute relays, and system status outputs. Setup menus provide convenient user access to configure the system for specific applications.
Included in Time Line Micro Lynx System
- Time Line Micro Lynx System Rack Unit w/power supply
- Micro Lynx Keyboard w/ Ethernet Comm. cable
- (2) Time Line Track Machine Control Cables
- Time Line Micro Lynx System Operating Manual
Features
Micro Lynx Keyboard Controller (KBD)
- Independent CPU with battery backed-up RAM retains all time code and system setup data when powered down
- Menu-driven tape transport selection from the Keyboard
- Supports subframe offsets
- Full transport control of up to 3 audio and/or video transports
- Full editing capability with transport controls, keypad input and special function keys
- Solo or Group operation of transports or MIDI devices
- User selected master for group operations of audio or video transports and MIDI controlled devices
- Computer guided entry (prompts displayed for next entry)
- Direct entry and calculation of time code numbers
- Supports register store and recall operations
- 100 memory locations
- Shuttle wheel for shuttle and frame jog operations with VTRs and many ATRs
- Trim mode to trim time code register values (frames & subframes) using a wheel rather than the calculator
- Locate mode to position all selected transports to a specified time code minus preroll
- Programmable edit sequences with rehearse-in/out, recordin/ out and replay
- Edit loop mode allowing a programmed edit sequence to be repeated indefinitely
Micro Lynx System Unit (SU)
Time Code Generator
- Generates all world wide standards: SMPTE drop frame and non-drop frame, EBU, and Film
- Reference sources: internal crystal, MIDI time code, external sync input, and digital audio clock
- External sync reference input accepts black burst, or composite sync
- Jam sync
- Pilot field rate output (60, 59.94, 50, 48 Hz) locked to generator Time Code Reader
- Two wideband, high speed readers (three with option card)
- Automatically detects time code type
- Supports both -10 dB and +4 dB input signal levels
- 1/10 to 60x speed
- Bi-directional
- Reshaped time code output derived from the reader
Synchronizer
- Two transports plus full chase capability for MIDI
- Supports over 120 different audio and video transports
- Selectable master, independent of machine cabling, VTRs can be slaves
- Select and set up transport from resident menus
- No internal adjustments
- Universal machine interface supports both master and slave operation
- Supports parallel, serial, and combined machine interfaces MIDI
- Synchronizes MIDI systems to ATR/VTRs
- Converts SMPTE to MIDI Time Code (MTC)
- Converts MTC to SMPTE, making MIDI the system master
- In, out and thru/out MIDI jacks
- DIN8 mini-circular connectors for direct Macintosh MIDI connection
Outputs
- Two programmable GPI relay closures
- GPI relay modes:
- Either GPI relay may be pulsed or latched
- One GPI has dialog beep mode with menu selections for 3 or 4 beeps, beep spacing, and beep duration
- Selectable Aux output- Reader 1, 2, 3 reshaped time code
- Pilot output
- ADR beep
- System lock tally
Computer Interface
- EIA standard RS-232C or RS422 serial I/O
- Computer control port allows communication with personal computers for full remote computer control
Specifications
Keyboard
- Free Standing
- Display Type 80 character, back lit LCD
- Keys 33 numeric function keys
- 12 transport control keys
- Jog/Shuttle wheel
- Communications RS422, 38.4 k baud asynchronous System Unit
- Rack mount or free standing
Communications:
- Keyboard RS422, 38.4 k baud asynchronous MIDI 31.25 k baud asynchronous
- Time Code Generator
- Unbalanced Output
- Output Level -1 dBm (1.4V pp)
- Output Impedance 100 ohms
- Signal Rise Time 4 microseconds
- Time Code Stability ± 2 microseconds max.
- Operating Code SMPTE (30 FPS)
- SMPTE Drop Frame (30 FPS DF)
- EBU (25 FPS)
- Film Code (24 FPS)
- Pilot Rate 60, 59.94, 50, 48 Hz (locked to generator)
Reference Sources
- Internal Crystal 30, 29.97, 25, 24
- Timing Source Crystal (±20 ppm)
- External Video Input 30, 29.97 (NTSC), 25 (PAL)
- Black burst (.5V – 2.0V nominal)
- Composite sync (.5V – 8V p-p)
Synchronizer
- Lock Stability <± 50 microseconds
- Lock Time 2 – 3 seconds, nominal
- Tach Frequency Range 4 – 2000 Hz nominal, playspeed
- User Adjustment Required None
- Parallel Interfaces Use TimeLine parallel cables
Transports
- Supports transports manufactured by:
AEG, Akai, Alesis, Ampex, Denon, Fostex, JVC, 3M, Mitsubishi,
Otari, Panasonic, Saturn, Sony, Stellavox, Studer, Tascam
- Time Code Reader……Differential Input, Signal Input Level -20 to +10 dBm, Input Impedance 10 k ohms, Speed Range 1/10 to 60 x play speed, Bi-directional, Automatic Detection of Time Code Type, Reshape Output, Aux Inputs, Differential Input, Input Impedance 10 k ohms, Aux Outputs, Unbalanced Output, Output Level -1 dBm (1.4V pp), Output Impedance 100 ohms, Video Input, Differential Input, Input Level .5 V nominal to 8 V, Input Impedance 1 k ohms, Video Output, Single-ended Output, Output Level -600 mV nominal, unterminated, Output Impedance 75 ohms, Serial In/Out, Formats RS422, RS232C, Connectors Macintosh II Serial Interface (SCSI), 9-pin ‘D’ serial communications port
- Power Supply Unit……Power Supply Mains Input 100-250 VAC at 50/60 Hz, 15 W nominal, 30 W max., Output +5 V, 3A max, -12 V, 3A max, +12 V, 1.0A max
- Physical Size…… Keyboard 3” H x 8.75” W x 7.5” D, System Unit 1.75” H x 19” W x 11.75” D
- Weight…… Keyboard 1 lbs, System Unit 6 lbs
|
|
|
