|
|
|
|
Welcome to the new Sounds And Visions E.C. website, a one stop source for buying and selling your equipment. |
|
|
|
|
|
|
|
|
Would you like to be informed when new equipment comes in?
Submit your email address below! |
|
|
|
|
|
|
|
All Categories --> Pro Audio --> Synchronization and Clocks -->
Digidesign Protools Universal Slave Driver USD Clock
Condition: Excellent. This Digidesign Pro Tools USD sync box is in mint physical and functional condition. Manula included (but not pictured.) It was used in a pro non-smoking studio. Manual Included.
Model # MH038 - Serial # HG06280 Rev N
This is part of a Pro Tools Mix 24 Plus system that is being parted out. Please see our other items for more Digidesign hardware for sale.
The Universal Slave Driver allows ProTools, AudioVision and other devices to synchronize playback and record with a variety of time code and clock reference sources:- Video reference sync (black burst)
- Digidesign Super Clock (also termed “Slave Clock” 256x sample clock)
- Vertical-Interval time code (VITC)
- Composite Video
- Word Clock (1x sample clock)
- Linear time code (LTC; formerly known as longitudinal time code)
- AES/EBU null clock (AES “black” at 44.1 and 48kHz sample rates)
- Bi-Phase/Tach (various rates)
- Pilot Tone (50/60Hz)
- Universal Slave Driver’s own internal crystal reference (with variable speed capability)
The Universal Slave Driver can also be used to output both time code and clock reference signals. While resolved to one of the above reference sources, the Universal Slave Driver can simultaneously read time code (or bi-phase) and generate: - Digidesign Super Clock (256x sample clock)
- Word Clock (1x sample clock)
- AES/EBU null clock (AES “digital black”)
- VITC, LTC, and MTC
APPLICATIONS
With its many features, the Universal Slave Driver has a wide variety of applications for audio, video, film, and multimedia. The Universal Slave Driver can be used as:- LTC reader and generator
- VITC reader and generator (with window burn capabilities)
- Stand-alone time code and clock format
- Time code regenerator, for replacing damaged time code;
- Master clock for a Digidesign audio workstation-equipped studio
- Fast and accurate Universal Synchronizer for Digidesign AudioVision or ProTools, allowing it to slave to, or be master to, many different types of external devices.
SPECIFICATIONS- Compatible with Pro Tools|24, Pro Tools|24 MIX and Pro Tools|24 MIXplus systems.
- Near sample-accurate, lock to time code or bi-phase/tach signals when integrated with the software> (Software not included.)
- High-fidelity, low-jitter clock
- Supports all major industry standard clock sources and all industry standard time code formats
- Supports industry standard pull-up/pull-down rates for film/video integrated support in AudioVision 4.0
- 9-pin Serial connectors for machine control communication from the supported host software (when integrated with the host software)
- SMPTE Input (Longitudinal Time Code); -24 to +20 dBu; 200Kohms; balanced female XLR
- SMPTE Output: -24 dBu to +9 dBu;<5Kohms; Balanced male XLR
- PC Connection: RS-232 serial port; 25-pin D-subminiature female connector
- Macintosh Connection: Mac serial format; 8-pin mini DIN female connector
- MTC Output: 15 mA current loop; 31.25 Kbaud
- Nominal Output Sample Rates: 44.1 kHz; 48 kHz; 44.056 (44.1 kHz pull-down); 47.952 kHz (48 kHz pull-down); 44.144 kHz (44.1 kHz pull-up); 48.048 kHz (48 kHz pull-up)
- Frame Rates: 30 non-drop; 30 drop; 29.97 non-drop; 29.97 drop; 25; 24 fps
- Power Requirements: 85 to 264 VAC; 50/60 Hz autoswitching; 9.5 W typical, 30 W max
- USD Model No: MH038
Please use Fedex calculator on left for domestic shipping prices and Ebays international Calculator for international rates.
|
|
|
