Sounds And Visions E.C.
Sounds And Visions E.C. 0 item(s) on your Rack, totaling: $0
View Shopping Rack
Sounds And Visions E.C. LLC About Us Equipment Search FAQs Contact Us Services Offered



Welcome to the new Sounds And Visions E.C. website, a one stop source for buying and selling your equipment.

Would you like to be informed when new equipment comes in?
Submit your email address below!

   Subscribe to 'Latest SV Gear RSS Feed!'
All Categories  -->  Pro Audio  -->  Mixing Boards  -->  

Signal Transport Synth Driver 32 Channel Midi Synth DI


Condition: Very Good. This unit was taken from a working professional studio and was in use up to the day it was decommission for sale. Unfortunately the Elco cabling and power supply are not included. Information on obtaining these items will be included. We also have cheap cabling if you’re going to make your own snake… its not that hard! If you need us to make it, email us.

Model – SD-32-ED-GL
Serial No. 197102077A

Features
  • Input tie panel and multichannel balancing amplifier in one
  • No sonic degradation
  • High common mode rejection
  • High density
  • Economical
  • 6 dB fixed gain
  • User selectable grounding
Product Description
Signal Transport's Synth Driver addresses a common problem found in the MIDI/Synthesizer studio; unbalanced audio sources cause buzz and hum. Synth Driver provides a compact, convenient, high density balancing interface for your synthesizer and MIDI voices, so that even in the largest installations you can enjoy clean, quiet operation free of extraneous noise.

For best results, Synth Drivers are mounted in the rear of the synthesizer voice racks, close to the sound sources, and fed with short 1/4" jumper cables. Balanced output signals are then routed to the console via multi-pair cables. The high quality output balancing of the Synth Driver provides the ideal source for most mixers with balanced inputs. Each Synth Driver channel features a balanced input to eliminate ground loops between your synths and the Synth Driver itself. Internal one-per-channel ground jumpers allow you to configure the input/output shield lifting for compatibility with studio wiring and to take advantage of the input balancing.

Synth DriverAll models include 1/4" input connectors and multi-pin output. Options include rear panel multi-pin inputs and front panel individual ground lift switches in place of internal jumpers. Multi-pin input models provide a handy method of interfacing a "local" unbalanced input mixer without compromising the balance of the output send. Specify a ground lift model with front panel input lift switches when you expect frequent equipment changes.

Dimensions

  • 19"W x 1.75"H x 6.5D 6 lb

  • Allow additional 4" depth for connectors and cables

  • Tabletop PSU included 3"W x 6"L x 2.5"D
Specifications

  • Hum and noise: -80dBu 20-20K unweighted

  • Frequency response: 10Hz to 60Hz with 10KW load

  • Input impedance: 20KW balanced

  • Output drive: >+22dBu into 600W

  • Input CMRR: >60dB 20Hz-20kHz

  • Output CMRR: >40dB 20Hz-20kHz
For More Information including Elco Pin Outs please visit:
http://www.davidcarroll.com/Files/Synth%20driver%20tech%20notes.PDF


Browse Categories
Musical Instruments Musical Instruments
Pro Audio Pro Audio
Pro Audio Pro Video
Computer Equipment Computer Equipment
Audio-Video Hi-Fi & Home-Fi
Miscellaneous Miscellaneous


Archive   

   Privacy Policy | Disclaimer | Return Policy
   © Copyright 2003 - 2008 Sounds And Visions E.C. LLC    Home | About | Equipment | Contact | Services